Siemens Gigaset S675IP User Manual Download

Page: 82 / 164

Handset settings

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / settings_bs_hs_pabx.fm / 6.8.07

ion 4,

.09.

2005

Playing back sounds/viewing CLIP

pictures

Screensavers

Caller Pictures

Sounds

(select entry)

§Play§

View

Press the display key. Sounds

are played back or pictures are

displayed. Press the

key to

switch between entries.

§End§

”

Press the display key. Playback

of the sound or display of the

picture ends.
While you are playing back

sounds, you can also interrupt

playback with the

key.

Press

and

hold

(idle status).

If you have saved a picture in an invalid

data format, you will see an error message

after selecting the entry. Cancel the oper-

ation with

. Delete the picture

with

§Delete§

Sounds: Setting the volume

During playback:

§Volume§

Press the display key.

Set volume.

§Save§

Press the display key.

Renaming/deleting a picture

You have selected an entry.

§Options

Open menu.

If a picture cannot be deleted (

), these

options are not available. Depending on

the situation, you can select the following

functions:

Delete Entry

The selected entry is deleted.

Delete List

All entries in the list that can be deleted

are deleted.

Rename

Change the name (max. 16 characters)

and press

§Save§

. The entry is stored with

the new name.

Setting the alarm clock

Precondition:

The date and time have

already been set (page 12).

Activating/deactivating the alarm

clock and setting the wake-up time

Change multiple line input:

Activation:

Select

Off

Time:

Enter the wake-up time in 4-digit for-

mat.

Occurance:

Select

Daily

Monday-Friday

Volume:

Set loudspeaker (1–6).

Melody:

Select melody.

Save changes (page 127).

You will see the

icon.

A wake-up call with the selected ringer

tone is signalled on the handset. The

wake-up call sounds for 60 seconds.

shown in the display. If no key is pressed,

the wake-up call is repeated twice at five

minute intervals and then turned off.
During a call, the wake-up call is signalled

by a short tone.

Deactivating the wake-up call/

repeating after a pause (snooze mode)

Precondition

: A wake-up call is sounding.

§OFF§

Press the display key. The

wake-up call is deactivated.

§Snooze§

Press the display key or any

key. The wake-up call is deacti-

vated and then repeated after

5 minutes. After the second

repetition the wake-up call is

deactivated completely.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands