Siemens Gigaset S675IP User Manual Download

Page: 75 / 164

Using several handsets

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / T-NetBox_SAG-registration.fm / 6.8.07

ion 4,

.09.

2005

If the internal participant does

not

answer

or the line is busy, press the display key

§End§

to return to the external call.

When transferring a call you can also press

the end call key

before the internal

participant answers.
Then, if the internal participant does not

answer or the line is busy, the call will

automatically return to you (the display

will show

Recall

Initiating internal consultation call,

conference call

You are talking to an

external

participant

(via fixed line network or VoIP) and can

call an

internal

participant at the same

time to hold a consultation call.

Open the list of handsets.

The external participant hears

hold music if activated

(page 85).

Select handset and press

§OK§

When an internal participant answers you

can speak to them.
You have the following options:

Ending a consultation call

§End§

Press the display key.

You are reconnected with the external

participant.

Initiating a conference call

§Conf.§

Press the display key.

You are in a three-way conference call

with the external participant and the inter-

nal participant.
If the internal participant who has been

called ends the call (press end call key

), you will be connected with the

external participant. If you press end call

key

the external call will be trans-

ferred to the internal participant.

Accepting/rejecting call waiting during

an internal call

If you receive an

external

call during an

internal

call, you will hear the call waiting

tone (short tone). With Calling Line Identi-

fication, the caller's number will appear in

the display.

Ending an internal call, accepting an

external call

§Accept§

Press the display key.

The internal call is

ended

. You are con-

nected to the external caller.

Rejecting the external call

§Reject§

Press the display key.

The call waiting tone is turned off.

You remain connected with the internal

participant. The ringer tone can still be

heard on other registered handsets.

Using a handset as a
room monitor

If the room monitor is activated, a previ-

ously stored destination number is called

as soon as a set noise level is reached in

the room.
You can save an internal or external

number in your handset as the destination

number.
The room monitor call to an external

number stops after around 90 seconds.

The room monitor call to an internal

number (handset) stops after approx. 3

minutes (depending on the base station).

During use as a room monitor, all keys are

barred except for the end call key

. The

speaker of the handset is muted.
When the room monitor is activated,

incoming calls to the handset are indi-

cated

without a ringer tone

and are only

shown on the screen. The display and key-

pad are not illuminated and advisory

tones are also turned off.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands