Siemens Gigaset S675IP User Manual Download

Page: 131 / 164

130

Appendix

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / appendix.fm / 6.8.07

ion 4,

.09.

2005

Gigaset S675 IP – free software

Your Gigaset S675 IP's firmware includes

free software that is licensed under the

GNU Lesser General Public License. This

free software was developed by a third

party and is protected by copyright. You

will find the licence text in its original Eng-

lish version on the pages that follow.
The software is provided free of charge.

You are authorised to use this free soft-

ware in accordance with the above-men-

tioned licence conditions. In the event of

contradictions between these licence con-

ditions and the licence conditions that

apply for the software according to Sie-

mens Home and Office Communication

Devices GmbH & Co. KG, the above-men-

tioned licence conditions shall take prece-

dence for the free software.
The GNU Lesser General Public License

(LGPL) is supplied with this product. You

can also download the licence conditions

from the Internet:

The

LGPL

is available on the Internet at:

http://www.gnu.org/copyleft/

lesser.html

The

source text, including copyright

notices for free software,

is currently

available on the Internet at:
http://www.siemens.com/gigaset/

developer

For more information and Internet links to

the source text of the free software, see

the Online Support pages on the Internet

at:
www.siemens.com/gigasetcustomercare

If it is not already supplied with the prod-

uct, you can request the source text,

including copyright notices, from Sie-

mens. There is a charge to cover the cost

of copying and postage. Please submit this

request by e-mail or fax to the following

address or fax number within 3 years of

purchasing this product. Please state the

exact device type plus the version number

of the installed device software.

Use of the free software contained in this

product extending beyond the program

sequence intended by Siemens is at the

user's own risk – i.e. there shall be no

claims for liability for defects against Sie-

mens Home and Office Communication

Devices GmbH & Co. KG. The GNU Lesser

General Public License contains notes

regarding the author's liability for defects

or that of other proprietors of the free

software.
You shall have no right to assert a claim

against Siemens Home and Office Com-

munication Devices GmbH & Co. KG based

on liability for defects, if a defect in the

product is or could be due to changes you

have made to the programs or their con-

figuration. Furthermore, you shall have no

right to assert a claim against Siemens

Home and Office Communication Devices

GmbH & Co. KG based on liability for

defects if the free software infringes the

port for the software, including the free

software included within it, if it has been

changed.

Small Parts Dispatch Com Bocholt
E-mail: [email protected]
Fax:

0049 2871 / 91 30 29

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands