Siemens Gigaset S675IP User Manual Download

Page: 12 / 164

First steps

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / starting.fm / 6.8.07

ion 4,

.09.

2005

Closing the battery cover

First, align the notches on the side of

the battery cover with the protrusions

on the inside of the housing.

Then press the cover until it clicks into

place.

Opening the battery cover

If fitted, remove the belt clip.

Place your fingertip in the cavity on the

casing and pull the battery cover

upwards.

Connecting the charging cradle

The charging cradle is designed to be

operated in enclosed, dry areas at temper-

atures ranging from +5 °C to +45 °C.
Instructions on how to connect the charg-

ing cradle and mount it on the wall (if

required) can be found at the end of this

user guide.

To charge the batteries, leave the hand-

set in the charging cradle.

For questions and problems see page 118.

Initial charging and discharging of

batteries

If the handset is activated, the flashing

battery icon

in the top right of the dis-

play indicates that the batteries are being

charged.
During handset operation, the battery

icon indicates the charge status of the bat-

teries (page 1).
The correct charge status can only be dis-

played if the batteries are first fully

charged

and

discharged through use.

To do this, leave the handset in the

charging cradle without interruption

until the battery icon stops flashing in

the display (around 10 hours).

Once the batteries are fully charged,

remove the handset from the charging

cradle and do not put it back again until

the batteries are fully discharged.

Please note:

Always repeat the charging and dis-

charging procedure if you remove the

batteries from the handset and reinsert

them.

The batteries may warm up during

charging. This is not dangerous.

After a while the charge capacity of the

batteries will decrease for technical rea-

sons.

Please note:

– Only place the handset in the charging cra-

dle that is intended for it.

– If the handset has turned itself off because

the batteries are flat and is then placed in

the charging cradle, it will turn itself on

automatically.

Please note:

After the first battery charge

and

discharge,

you may place your handset in the charging

cradle after every call.

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands