Siemens Gigaset S675IP User Manual Download

Page: 115 / 164

114

Web configurator

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / web_server.fm / 6.8.07

Making e-mail settings

You can use your phone to be notified

about new e-mail messages on your

incoming e-mail server (page 61).
You must store the address/DNS name of

your incoming e-mail server and your per-

sonal access data in the phone and acti-

vate the e-mail check with the incoming e-

mail server, so that the phone can connect

to the incoming e-mail server and your

mailbox.

Open the following Web page:

Settings

Messaging

E-Mail

Enter the user name (account name)

agreed with the Internet provider (max.

50 characters) in the

Authentication

Name

field.

Enter the password that you agreed

with your provider for accessing the

incoming e-mail server (max. 20 char-

acters; case sensitive) in the

Authentica-

tion password

field.

Enter the name of the incoming e-mail

server (POP3 server) (max. 74 charac-

ters) in the

POP3 Server

field. Example:

pop.theserver.com.

From the

Check for new e-mail

list select

the time interval at which your phone

should check if new messages have

arrived in your incoming e-mail server.

Select

Never

to deactivate the prompt.

Select one of the other values to acti-

vate the prompt for new e-mail mes-

sages.

Click the

Set

button to save the settings

in your phone.

Activating/deactivating info
services

You can configure your registered

Gigaset S67H handsets to display custom-

ised text information on the idle display.

Precondition:

The

Clock

is set as a screen-

saver on the handset (page 76).
Incoming text information will overwrite

the screensaver.
You can activate and deactivate the dis-

play of text information for every hand-

set.

Open the following Web page:

Settings

Info services on screensaver

Activate

Yes / No

to switch the display of

text information on or off.

Click the

Set

button to save the settings

in your phone.

Configuring info services

Click the link
www.gigaset.net/myaccount
or enter the URL into the address field

of a different browser window.

Enter the account data shown on the

Info services on screensaver

Web page

into the fields for the user account.

This will open a Web page where you can

compile your info service.

Define which information should be

sent regularly to your handset.

Defining the server for firmware
updates, starting the update

If necessary, you can load updates of the

base station firmware onto your phone.

You can either download the updates

directly from the Internet or from a PC in

your local network.
Using the Web configurator you can spec-

ify from where the firmware should be

loaded.

Please note:

For how to show the messages from your mail-

box on your handset, see page 61

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands