manualshive.com logo in svg

Siemens Gigaset S675IP, User Manual

Share
Download
Siemens Gigaset S675IP User Manual Download Page 11

10

First steps

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / starting.fm / 6.8.07

Ve

rs

ion 4,

 16

.09.

2005

First steps

Pack contents

The pack contains:

u

one Gigaset S675 IP base station

u

one Gigaset S67H handset

u

one mains adapter for the base station 

u

one charging cradle incl. mains adapter

u

one phone cable

u

one Ethernet cable (LAN cable)

u

two batteries

u

one battery cover

u

one belt clip

u

one quick guide

Setting up the handset for use

The display is protected by a 

plastic film. 

Please remove 

the protective film!

Inserting the batteries 

¤

Insert the batteries the right way round 

(see figure).

The polarity is indicated in/on the battery 

compartment.

The handset switches on automatically. 

You will hear a confirmation tone.

Firmware updates:

Whenever there are new or improved func-

tions for your Gigaset S675 IP, base station 

firmware updates will be made available for 

you to download to your telephone (page 85). 

If this results in operational changes to your 

phone, a new version of this user guide will be 

published on the Internet at 
www.siemens.com/gigaset

Warning: 

Only use rechargeable batteries (page 125) 

recommended by Siemens Home and Office 

Communication Devices GmbH & Co. KG. 

Never use a conventional (non-rechargeable) 

battery or other battery types as this could 

result in significant health risks and personal 

injury. For example, the batteries could 

explode. The phone could also malfunction or 

be damaged as a result of using batteries that 

are not of the recommended type.

Summary of Contents for Gigaset S675IP





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands