Siemens Gigaset S675 IP Manual Download Page 89

Page: 89 / 254

Using the Instant Messenger (IM)

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / messenger.fm / 14.05.2009

ion 8,

.09

.200

Requesting information about buddies

You have opened the Buddy list (

Page 85

Select

buddy.

§Info§

Press the Display key.

The display depends on the provider.
Example:

1 Web name (nickname, abbreviated if necessary)

2 Status

3 User ID (format: userid@provider-domain; abbreviated if necessary). (Resource

names are not displayed)

Press

”

to return to your Buddy list. Press

§Chat§

to chat with the buddy.

Chatting to buddies

You want to chat to a buddy, i.e. send a message.

Prerequisite:

You have opened the Buddy list (

Page 85

) and selected a

buddy with

Press the Display key

§Chat§

. The text editor is opened.

Write and send your message (

Page 89

The Buddy list is shown again.

Receiving messages

Prerequisite:

You are online.

Newly arrived buddy or info messages (

Page 88

) are indicated by a flashing

Message key

and a beep, even if you are in a messenger menu or text edi-

tor.
The messages are stored in the

Messenger:

Message list.

Opening the Message list using the

key

The Message key flashes.

Press the Message key

Info

Julian

Online

Julian

jabbe.com

Chat

Please note

The

Messenger

list is only displayed if you are online.

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands