24
First steps
S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / starting.fm / 14.05.2009
Ve
rs
ion 8,
03
.09
.200
8
Making settings for VoIP telephony
Before you can use the Internet (VoIP) to phone any other numbers on the
Internet, the fixed line network or the cellular phone network, you need the
services of a VoIP provider who supports the VoIP SIP standard.
Prerequisite:
You have registered with such a VoIP provider (e.g. via your PC)
and set up at least one VoIP account.
To use VoIP, you need to enter the access data for your VoIP account. You will
receive all the necessary data from your VoIP provider. This will include:
Either:
u
Your user name (if requested by the VoIP provider) is the user identification
(Caller ID) for your account, which is often identical to your phone number
u
Your authentication name or login ID
u
The (login) password registered with the VoIP provider
u
General settings for your VoIP provider (server addresses, etc.)
Or:
u
An auto-configuration code (Activation Code)
Your phone connection assistant can help you make these entries.
Starting the connection assistant
Prerequisite:
The base station is connected to the electrical power supply and
a router. Your router is connected to the Internet (
Please note
Your phone is preconfigured for dynamic assignment of the IP address. In
order for your router to "recognize" the phone, dynamic IP address assignment
must also be activated on the router, i.e. the router's DHCP server must be acti-
vated.
If the DHCP server cannot or should not be activated, you must first assign a
fixed IP address to the phone. For further information, see
.
As soon as the handset battery is sufficiently
charged, the Message key
f
on the hand-
set will flash (approx. 20 minutes after you
have put the handset in the charging cradle).
¤
Press the Message key
f
.
