Siemens Gigaset S675 IP Manual Download Page 17

Page: 17 / 254

First steps

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / starting.fm / 14.05.2009

ion 8,

.09

.200

Connecting the charging cradle

The charging cradle is designed to be operated in enclosed, dry areas at tem-

peratures ranging from +41°F to +113°F.

To charge the batteries, leave the handset in the charging cradle.

For information on attaching the charging cradle to the wall,

Page 251

If you have any questions or problems

Page 191

Initial charging and discharging of the batteries

Remove the handset from the charging cradle and do not replace it until the

batteries are fully discharged.
The charge status is displayed in the idle display.

(empty to full)

flashes, the batteries are almost empty.

Plug the electrical adapter into

the plug socket

Connect the empty plug from the

power adapter

To disconnect the plug from the charging

cradle, press the release button

and dis-

connect the plug

Please note

Only place the handset in the charging cradle for which it is intended.

If the handset has turned itself off because the batteries are empty and is

then placed in the charging cradle, it will turn itself on automatically.

Place the handset in the charging cradle and wait until the

batteries are fully charged (approx.

hours).

If the handset is switched on, battery charging is indicated

in the top right of the display by the flashing battery icon

10 h

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands