Siemens Gigaset S675 IP Manual Download Page 16

Page: 16 / 254

First steps

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / starting.fm / 14.05.2009

ion 8,

.09

.200

Setting up the handset for use

The display is protected by a plastic film.

Please remove the pro-

tective film!

Inserting the batteries and closing the battery cover

Use only the recommended, rechargeable batteries (

Page 201

). Using con-

ventional (non-rechargeable) batteries or other types of batteries could result

in significant health risks and personal injury. For example, the outer casing of

the batteries could be destroyed or the batteries could explode. The phone

could also malfunction or be damaged as a result of using batteries that are not

of the recommended type.

Warning

Insert the batteries with the polarity

in the correct direction.

The polarity is indicated in/on the

battery compartment.

The handset is activated automatically.

You will hear a confirmation tone.

First align the notches on the

side of the battery cover with

the lugs on the inside of the

casing.

Then press the cover until it

clicks into place.

To open the battery cover, for

instance to replace the batteries,

remove the belt clip (if

attached). Insert a coin into the

cavity on the casing, then pull

the battery cover in an upward

direction.

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands