Siemens Gigaset S675 IP Manual Download Page 108

Page: 108 / 254

106

Operating the base station answering machine

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 14.05.2009

ion 8,

.09

.200

You can control message playback using the keypad.

Operating the answering machine via the keypad

The following keys are used for operation:

Go to the start of the current message. Press repeatedly to go to the

previous messages.

Stop/resume:

Stop playback. Press again to resume.

If there is a pause lasting longer than one minute, the connection

to the answering machine is terminated.

Skip to next message. Press several times to go to the following

messages.

New:

Mark current message as "new". Start playback of the following

message.

Delete:

Delete current message.

Canceling remote operation

Press the End Call key or replace the receiver.

Activating the answering machine

Phone home and allow the phone to ring for around a minute. Use a phone

number that has been assigned to the answering machine as a receive

number.

You will hear: "Please enter PIN".

Enter system PIN.

Your answering machine is activated in the set mode (

Page 98

). It tells you

how much memory time is left.
The messages are now played back.
The answering machine cannot be deactivated remotely.

Please note

The answering machine will terminate the connection under the following cir-

cumstances:

An incorrect system PIN has been entered.

There are no messages in the answering machine.

After the remaining memory announcement

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands