46
Using several handsets
Gigaset S440-445 / IM-engl / A31008-M1635-A661-1-7619 / registration.fm / 07.06.2005
Deactivating Walk and Talk mode
§OFF§
Press the display key.
Using a handset in Walk and Talk
mode as a room monitor
This function allows you to use the Walk
and Talk mode as a room monitor. The
room monitor will then call all handsets
that are in Walk and Talk mode as soon as
the previously set noise level has been
reached.
During the call, all keys are locked except
the end call key. The room monitor
function
remains
active
after you end the
call. It must be activated again if the hand-
set has been switched off.
Activating/deactivating the
room monitor
©
Press the display key.
Room Monitor
Select and press
§OK§
.
Room M.:
Select
On
to activate. Select
Off
to deac-
tivate.
Level:
Set the noise sensitivity at the desired
level (
Low
or
High
).
¤
Save changes.
The room monitor has now been acti-
vated/deactivated.
Caution!
–
You should always check the operation
of the room monitor before use.
For example, test the sensitivity and
connection.
– The active room monitor function consider-
ably reduces the operating time of the
handset. Place the handset in the charging
cradle if necessary. This ensures that the
battery does not run down.
– The handset should be positioned 1 to
2 metres away from the baby. The micro-
phone must be directed towards the baby.
– Please note that the Walk and Talk func-
tion's room monitor does not provide full
security.
