Configuration
7
Configuration
The purpose of configuration is to register the Gigaset M105 Data unit at
a Gigaset 3070/3075isdn base station, at a second Gigaset M105 Data
or at a Gigaset M101 Data. You can only perform configuration with the
configuration program.
Registering Gigaset M105 Data at Gigaset 3070isdn/
3075isdn
Proceed as follows:
1.
Install Gigaset M105 Data.
2.
Switch Gigaset 3070/3075isdn to registration mode (press LED).
3.
Start the Gigaset M105 Data configuration program.
4.
5.
Click the
button and enter the base station PIN.
6.
Find a registration location and click
OK
. The registration procedure
starts and the message "
If the required base is ready for registration,
the local adapter logs on. Check that the base is ready for registra-
tion.
" appears on the screen.
The two devices are automatically synchronised. There is now one entry
in the
Registered bases
list.
7.
Close the program with
OK
.
In the event of errors or for more information, see
