Configuration program options
15
Changing the name
The purpose of adapter names is to provide a rapid overview. The local
adapter must be called "PC". The remote adapters should, if possible, be
named after the peripheral device connected, e.g. "3070/3075isdn" or
"Modem".
Adapter names can be changed by entering or changing a name in the
Name field. Names can contain letters and digits as well as blanks. The
name must not contain more than 20 characters.
Normally, a portable part is operated at the PC and the base station is op-
erated at the peripheral device. Other constellations, however, are possi-
ble in which both adapters are connected to a PC in order, for example,
to create a cordless data connection between two PCs. In this case, the
adapter type of one of Gigaset M105 Data units must be
adapter type of the other must be a
. Or you can implement more
than one remote adapter in order to control a second PC or the modem
alternately. It may also be necessary here to change the adapter type at
one of the Gigaset M105 Data units.
z
Ensure that the correct Gigaset M105 Data is connected at the PC.
z
. The change is performed in the back-
ground. You can see that it has been performed when the information
in the
line changes.
