10
Installation
Gigaset HomePlug AV 200 / LBA_en / A31008-N1076-E301-3-7619 / device.fm / 27.08.2007
Sc
hablone 2
005_0
7_2
7
Connecting to the Mains
ì
Insert the Gigaset HomePlug AV 200 into the socket.
Display of connection quality
The Link LED indicates the bandwidth of the received data by its colour and in so doing
provides information about the HDTV suitability of the sockets used.
Synchronising Two Gigaset HomePlug AV 200
All devices with an identical network ID communicate with one another ("Security in the
Network" on page 5). Synchronisation can be used to change this network ID in your
Powerline network. The network ID is always created by a random generator and cannot
be selected. A new (random) network ID is assigned to two adapters during the course
of the synchronisation process.
Carry out the following steps here:
u
Connect all Gigaset HomePlug AV 200 to the mains supply.
u
Reset the network ID of each individual adapter (p. 11).
u
Press the synchronisation keys for both adapters in succession for two seconds each.
The Link LEDs on the two adapters light after a few seconds and the Powerline network
is synchronised.
LED
Display
Status
Link
Off
No Powerline connection available.
Green
Excellent connection, multiple HDTV transmission possible.
Yellow
Good connection, multiple HDTV transmission cannot be
guaranteed.
Red
Electrical faults are impairing the connection:
HDTV cannot be guaranteed.
Flashing Data being transferred.
