Siemens Gigaset E500 User Manual Download Page 56

Page: 56 / 84

Using multiple handsets

Gigaset E500/E500A / AUS / A31008-M2206-C401-1-7619 / T-NetBox_SAG-registration.fm /

rsion 4, 16.09

.2005

Using multiple
handsets

Registering handsets

You can register up to four handsets
on the base.

Registering a Gigaset handset
manually on the Gigaset E500/
E500A

You must register the handset man-
ually on both the handset (1) and
the base (2).
After it has registered, the handset
returns to idle status. The internal
number of the handset appears in
the display, e.g.,

INT 1

The registration process is cancelled
after 60 seconds. If the handset has
not registered within this time,
repeat the process.

Registering other handsets

You can register other Gigaset hand-
sets and handsets for other devices
with GAP functionality as follows.

De-registering handsets

You can de-register all other regis-
tered handsets from each of the reg-
istered Gigaset E500H handsets.

§Menu§

Settings

§OK§

Registering

§OK§

De-register Handset

§OK§

Select the internal
party(ies) you wish to de-
register and press

§OK§

(The handset you are cur-
rently using is indicated
by

Enter the current system
PIN and press

§OK§

§Yes§

Press the display key.

1) On the handset

Menu§

Settings

§OK§

Registering

§OK§

Register Handset

§OK§

Enter the base system PIN

(default setting: 0000)

§OK§

2) On the base

Within 60 seconds,

press and

hold

the registration/paging key

on the base (

page 4) for

approx. 3 seconds.

1) On the handset

Start to register the handset as
described in its user guide.

2) On the base

Press and hold

the registration/

paging key

on the base

(

page 4) for

approx. 3 seconds.

Summary of Contents for Gigaset E500





















































































Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands

Siemens Gigaset E500, User Manual

Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands