34
Making calls
Gigaset E500/E500A / AUS / A31008-M2206-C401-1-7619 / telephony.fm / 01.03.2011
V
e
rsion 4, 16.09
.2005
Have you ordered the calling line
display service from your network
provider?
¤
Check whether your provider
supports calling line display
(CLIP) and that the function has
been activated for you. If neces-
sary, contact your provider.
Additional information on this sub-
ject can be found on the Gigaset
homepage at:
www.gigaset.com/service
Handsfree operation
In handsfree mode, you activate the
loudspeaker so that you can hear
the caller without having to hold the
handset to your ear. You therefore
have both hands free and other peo-
ple can listen in on the conversation.
Activating/deactivating
handsfree mode
Activating while dialling
~ d
Enter the number and
press the handsfree key.
Switching between earpiece and
handsfree mode
d
Press the handsfree key.
During a call and when listening to
the answering machine (Gigaset
E500A only), activate or deactivate
handsfree mode.
If you wish to place the handset in
the charger during a call:
¤
Press and hold the handsfree key
d
while placing the handset in
the charger and for a further 2
seconds. Otherwise, the call is
cancelled.
¤
For instructions on adjusting the
handsfree volume (
Muting
You can deactivate your handset's
microphone during a call.
§Mute§
Press the display key to
mute the handset.
§On§
Press the display key to
reactivate the micro-
phone.
Please note
Inform your caller before you use
the handsfree function so that
the caller knows a third party may
be listening.
Please note
If you have a headset connected,
you can switch between the
headset and handsfree mode.
Please note
A connected headset will also be
muted.
