Siemens Gigaset E500 User Manual Download Page 18

Page: 18 / 84

First steps

Gigaset E500/E500A / AUS / A31008-M2206-C401-1-7619 / first_steps.fm / 01.03.2011

rsion 4, 16.0

.2005

Attaching the belt clip

The handset has notches on each side to attach the belt clip.

To attach

— press the belt clip

onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.

To remove

— press the centre

of the belt clip firmly with your
right thumb, push the finger-
nail of your left index finger up
between the clip and the hous-
ing and pull the clip in an
upward direction.

Charging the battery

The correct charge status can only be displayed if the battery is first
fully charged

and

discharged.

Place the handset in the base with its

display facing forward

for

7.5 hours

Please note

The handset must only be placed in the designated E500/E500A
base or the corresponding charger.

7.5hr

Summary of Contents for Gigaset E500





















































































Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands

Siemens Gigaset E500, User Manual

Search results

Summary of Contents for Gigaset E500

Reviews:

Related manuals for Gigaset E500

Brands by name

Popular brands