140
Configuring the system settings
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / settings.fm / 31.08.10
V
e
rsion 4, 16.0
9
.2005
Activating repeater support
You can increase the range and signal
strength of your base using a repeater. You
will need to activate repeater mode. This will
terminate any calls that are in progress at the
time.
Prerequisite:
Eco mode(+) is deactivated.
v
¢
Ï
¢
System
¢
Repeater Mode
§Change§
Press the display key to activate
or deactivate repeater mode
(
³
= on).
§Yes§
Press the display key to confirm
the prompt.
Activating/deactivating the
DECT interface
If you deactivate the DECT interface, the
radio connection between the base and the
registered handsets/repeaters is terminated.
Handsets/repeaters are "asynchronous" to
the base. They cannot establish a connec-
tion with the base and no calls are signalled.
Handsets/repeaters do remain registered to
the base and will synchronise with the base
as soon as you reactivate the DECT interface.
v
¢
Ï
Settings
¢
System
¢
DECT Interface
§Change§
Press the display key to activate/
deactivate the DECT interface
(
³
= activated).
If there are no handsets or repeaters regis-
tered to the base, the base's DECT interface
is automatically deactivated.
If you switch the base to registration mode
to reregister handsets/
repeaters, the DECT interface is automati-
cally reactivated.
Activating/deactivating the
FAX port (ISDN)
Prerequisite:
Your base is connected to the
ISDN.
You can connect a fax machine to the FAX
port on the telephone. To register the fax
machine to the base, you must activate the
FAX port.
The FAX port is deactivated by default.
When you activate the FAX port, it is
regarded as registered. The internal number
8 is assigned to it/the connected fax
machine.
INT 8
is displayed in the list of
internal parties (even if there is not a fax
machine connected).
v
¢
Ï
Settings
¢
System
¢
FAX Port
§Change§
Press the display key to activate/
deactivate the FAX port
(
³
= on).
For instructions on connecting a fax
machine see
Please note
u
Repeater support and
Eco Mode /
Eco Mode+
cancel
each other out, i.e., both functions
cannot be used at the same time.
u
The default encrypted transmission
setting is deactivated when repeater
mode is activated.
