11
Installing the base station
First steps
CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / starting.fm / 02.03.2007
Ve
rs
ion 2,
21
.12.
2006
u
The batteries may warm up during charging. This is not dangerous.
u
After a while the charge capacity of the batteries will decrease for technical reasons.
Setting the date and time
§Menu§
¢
Settings
¢
Date/Time
~
Enter the day, month and year in 6-digit format and press
§OK§
. Use
q
to move
between the fields.
~
Enter hours and minutes in 4-digit format (e.g. 0 7 1 5 for 07:15) and press
§OK§
.
Use
q
to move between the fields.
The date and time are shown in the handset's idle display (page 1).
Registering the handset to the base station
The supplied handset is registered to the base station by default.
Instructions on how to register further handsets to the base station are given on page 48.
Installing the base station
The base station is designed for use in closed, dry rooms with a temperature range of
+5 °C to +45 °C.
¤
Place or hang the base station in a central position in your flat or house.
Please note:
u
Never expose the telephone to heat sources, direct sunlight or other electrical
appliances.
u
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
u
The base station must only be operated on a LAN network (SELV network in accordance
with IEC 60950-1) inside a building.
Please note:
You will find explanations for the symbols and typographical conventions used in this user guide in
the appendix, page 112.
