Siemens Gigaset C670 User Manual Download Page 9

Page: 9 / 26

First steps

Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / starting.fm / 5.9.08

ion 4,

.09.

2005

until click sound is heard, means the cover

is fixed properly.

Opening the battery cover

Push downward to open the cover.

Initial charging and discharging of

batteries

If the handset is activated, the flashing

battery icon in the top right of the display

indicates that the batteries are being

charged.
During handset operation, the battery

icon indicates the charge status of the bat-

teries . The correct charge level can only

be displayed if the batteries are first fully

charged

and

discharged.

To do this, leave the handset in the

charging cradle

without interruption

for

hours.

Afterwards, remove the handset from

the charging cradle and do not put it

back again until the batteries are fully

discharged.

Please note:

Always repeat the charging and dis-

charging procedure if you remove the

batteries from the handset and reinsert

them.

The batteries may warm up during

charging. This is not dangerous.

After a while the charge capacity of the

batteries will decrease for technical rea-

sons.

Registering handsets

You can register up to four handsets to

your base.
Registering the handset to the base sta-

tion occurs automatically on first using.
If the automatic register failed, please do

the operations on the handset and on the

base as below.

Operations on the handset

Press

Select

ADVANCED SET.

with

and con-

firm with

Select

REGISTRATION

and confirm with

Confirm both messages with

Proceed with the operations on the

base.

Operations on the base

Press and

hold

the paging key

(

)

on the base until beep sounds (approx.

3 sec.).

Input the handset name and confirm

with

Once it has been registered successfully,

the handset returns to idle status. The

name and the handset’s internal number

is shown in the display e.g.

INT 1

If fail to register, repeat the procedure.

Deregistering handsets

Press

Select

ADVANCED SET.

with

and con-

firm with

Select

DEREGISTRATION

and confirm

with

Please note:

After the first battery charge

and

discharge

you may replace your handset in its charger

after every call.

Please note:

Do not deregister handsets unless necessary!

Summary of Contents for Gigaset C670



























Search results

Summary of Contents for Gigaset C670

Reviews:

Related manuals for Gigaset C670

Brands by name

Popular brands

Siemens Gigaset C670, User Manual

Search results

Summary of Contents for Gigaset C670

Reviews:

Related manuals for Gigaset C670

Brands by name

Popular brands