52
Connecting the base to the PABX
Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / pabx.fm / 19.04.2010
V
e
rsion 4, 16.0
9
.2005
Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
Dialing modes and recall
The current setting is indicated by
Ø
.
Changing the dialing mode
The following dialing modes can be
selected:
u
Tone dialing (DTMF)
u
Dial pulsing (DP)
v
¢
Ï
¢
Telephony
¢
Dialing Mode
s
Select dialing mode and press
§Select§
(
Ø
= selected).
Setting Flash
Your phone is preset at the factory for oper-
ation on the main connection. For operation
on a PABX, you may have to change this
value. Please refer to the user guide for your
PABX.
v
¢
Ï
¢
Telephony
¢
Flash
s
Select recall and press
§Select§
(
Ø
= set value).
Possible values are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 400 ms, 600 ms,
800 ms.
Setting pauses
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key
c
and sending the number.
v
Open the main menu.
*#Q5#
L
Press keys.
~
Enter digit for the pause length
(
1
= 1 sec.;
2
= 3 sec.;
3
= 7 sec.)
and press
§OK§
.
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5#
2
Press keys.
~
Enter a digit for the length of the
pause (
1
= 800 ms;
2
= 1600 ms;
3
= 3200 ms) and press
§OK§
.
Temporarily switching to
tone dialing (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need tone dialing for a connec-
tion (e.g. to listen to the network mailbox)
you must switch to tone dialing for the call.
Prerequisite:
You are conducting a call or
have already dialed an external number.
*
Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.
•
Summary of Contents for Gigaset C590
Page 226: ......
