Siemens Gigaset C450 IP Owner'S Manual Download

Page: 20 / 106

Making calls with VoIP and the fixed network

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / telephony.fm / 24.9.07

Ver

on 4, 16.

09.20

Accepting a call

The handset indicates an incoming call in

three ways: by ringing, by a display on the

screen and by the flashing handsfree key

You can answer the call by:

Pressing the talk key

Pressing the handsfree key

If the handset is in the charging cradle and

the

Auto Answer

function is activated

(page 42), the handset will take a call

automatically when you lift it out of the

cradle.
If the ringer tone is intrusive, press

§Menu§

Silent

. You can accept the call so long

as it is displayed on the screen.

Calling Line Identification

When you receive a call from the Internet,

the caller's number and/or the name they

have specified is displayed on the screen.
When you receive a call from the fixed net-

work, the caller's number and/or name is

displayed on the screen if the following

conditions are met:

Your fixed network provider supports

CLIP, CLI and CNIP:
– CLI (Calling Line Identification): the

caller's number is transmitted

– CLIP (Calling Line Identification Pres-

entation): the caller's number is dis-

played

– CNIP (Calling Name Identification

Presentation): the caller's name is

displayed

You have arranged CLIP or CNIP with

your network provider.

The caller has arranged CLI with the

network provider.

If the phone number is identified and the

caller's number is saved in your directory,

the name will be displayed from the direc-

tory.

Call display

By means of the ringer tone icon on the

screen, you can decide whether the call is

directed to your fixed network number or

to your VoIP number.

Calls to your fixed network number

1 Ringer tone icon

2 Number or name of caller

Calls to your VoIP number

1 Ringer tone icon

2 Number or name of caller

Display when Calling Line Identification is

withheld

For calls from the fixed network, the caller

can withhold calling line identification or

not request it. In this case the number is

not displayed. The following is displayed

in place of the number:

External Call

, if no number is trans-

mitted.

Withheld

, if the caller has withheld Call-

ing Line Identification.

Unavailable

, if the caller has not

arranged Calling Line Identification.

1234567890

Menu§

1234567890

Menu§

Summary of Contents for Gigaset C450 IP











































































































Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands

Siemens Gigaset C450 IP, Owner'S Manual

Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands