Siemens Gigaset C450 IP Owner'S Manual Download

Page: 14 / 106

First steps

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / starting.fm / 24.9.07

Ver

on 4, 16.

09.20

You will find other messages and possible

measures in the Questions and answers

section on page 69.

Belt clip and headset

By using a belt clip and headset (optional)

you can easily make your handset a con-

stant companion both inside the building

and in its immediate vicinity.

Attaching the belt clip

There are notches for attaching the belt

clip on the side of the handset at approxi-

mately the same height as the display.

Press the belt clip onto the back of the

handset so that the protrusions on the

belt clip engage with the notches.

The tongue of the belt clip must face the

battery compartment.

Connection socket for headset

You can use headsets with jack connec-

tors. The following models have been

tested and are therefore recommended:

HAMA Plantronics M40, MX100 and

MX150.
The transmission quality of other models

cannot be guaranteed.

Summary of Contents for Gigaset C450 IP











































































































Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands

Siemens Gigaset C450 IP, Owner'S Manual

Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands