Siemens Gigaset C385 User Manual Download Page 11

Page: 11 / 65

First steps

C380-C385 / GBR / A31008-M2026-L101-1-7619 / starting.fm / 17.10.2008

ion 4,

.10.

2007

Setting up the handset for use

The display is protected by a plastic film.

Please remove the protective film!

Inserting the batteries and closing the battery cover

Warning

Use only the rechargeable batteries recommended by

Gigaset Communications GmbH

(

page 52). Never use a conventional

(non-rechargeable) battery or other battery types as this could result in sig-

nificant health risks and personal injury. For example, the batteries could

explode. The phone could also malfunction or be damaged as a result of

using batteries that are not of the recommended type.

* Gigaset Communications GmbH is a trademark licensee of Siemens AG.

Insert the batter-

ies the right way

round.

The polarity is

indicated in/on

the battery compartment.

First insert the battery cover

at the top

Then press the cover

until it clicks into place.

If you need to open the battery

cover, for instance to replace the

batteries, place your fingertip in

the cavity on the casing and pull

the battery cover upwards.

Summary of Contents for Gigaset C385


































































Search results

Summary of Contents for Gigaset C385

Reviews:

Related manuals for Gigaset C385

Brands by name

Popular brands

Siemens Gigaset C385, User Manual

Search results

Summary of Contents for Gigaset C385

Reviews:

Related manuals for Gigaset C385

Brands by name

Popular brands