Siemens Gigaset C380 User Manual Download Page 38

Page: 38 / 71

Operating the answer machine of the Gigaset C385 base station

Gigaset C380-C385 / IM English / A31008-M2007-R101-2-3T19 / answering_m.fm / 09.11.2010

rsion 4, 16.0

.2005

Deleting announcements

Menu

Voice Mail

Announcements

Delete Announcement

§OK§

Press the display key to confirm
the prompt.

Press

and

hold

(idle status).

The pre-recorded announcement is used
again after a personal announcement is
deleted.

Playing back messages

The date and time of each message is logged
(provided this has been set,

page 13). If

Calling Line Identification is activated, the
caller's number is displayed. If the caller's
number is saved in the directory, their name
is displayed.

New messages that have not yet been
played back are indicated by a message in
the display and by the

key flashing on

the handset. The

key flashes on the base

station.

To listen to messages:

Press the message key.

Answ. Mach.

Select as required and press

§OK§

If you have new messages, playback will
start with the first new message, otherwise
with the first old message.

Summary of Contents for Gigaset C380








































































Search results

Summary of Contents for Gigaset C380

Reviews:

Brands by name

Popular brands

Siemens Gigaset C380, User Manual

Search results

Summary of Contents for Gigaset C380

Reviews:

Brands by name

Popular brands