Siemens Gigaset C350 Manual Download Page 40

Page: 40 / 55

Appendix

Gigaset C350 / GBR / A31008-M1621-L161-1-7619 / appendix.fm / 19.1.05

Appendix

Care

Wipe the base and the handset with a

damp

cloth (do not use solvent) or an

antistatic cloth.

Never

use a dry cloth as this can cause

static.

Contact with liquid

If the handset has come into contact with

liquid:
1.

Switch the handset off and remove

the batteries immediately

2. Allow the liquid to drain from the hand-

set.

3. Pat all parts dry, then place the handset

with the battery compartment open

and the keypad facing down in a dry,

warm place

for at least 72 hours

(

not

in a microwave, oven etc.).

4. Do not activate the handset again

until it is dry.

When it has fully dried out you will nor-

mally be able to use it again.

Questions and answers

If you have any queries about the use of

your phone, you can contact us any time

at www.siemens.com/gigasetcustomer-

care. The table below contains a list of

common problems and possible solutions.

The display is blank.

1. The handset is not switched on.

Press the 'end call' key

and hold

2. The battery is flat.

Charge the battery or replace it

(page 6).

The keys of a handset do not respond when

pressed.
The keypad lock is activated.

Press and

hold

the hash key

(page 7).

"Base x“

flashes

in the display.

1. The handset is outside the range of the

base.

Move the handset closer to the base.

2. The handset has been de-registered.

3. The base is not switched on.

Check the base's mains adapter

(page 5).

" Please Register" flashes in the display.

No base is switched on or within range.

Move the handset closer to the base.

Check the base's mains adapter (page 5).

Handset does not ring.

1. The ringer is switched off.

Activate the ringer (page 33).

2. Call diversion is set to

All Calls

Switch off call diversion (page 13).

You hear no ring tone/dial tone.

The base's telephone line cord has been

replaced.

When buying a replacement line cord,

ensure that the line plug has the correct

type of wiring (page 6) .

The caller cannot hear you.

You have pressed the

(

§INT§

) key. The hand-

set is "muted".

Cancel muting (page 12).

The caller's number is not displayed despite

CLIP

Number identification is not enabled.

The

caller

should ask his network service

provider to activate calling line identifica-

tion (CLI).

Summary of Contents for Gigaset C350
























































Search results

Summary of Contents for Gigaset C350

Reviews:

Related manuals for Gigaset C350

Brands by name

Popular brands

Siemens Gigaset C350, Manual

Search results

Summary of Contents for Gigaset C350

Reviews:

Related manuals for Gigaset C350

Brands by name

Popular brands