45
Base station settings
Gigaset C300 / GRC EN / A31008-M2203-T101-1-8U19 / registr_sett.fm / 10.06.2010
V
e
rsion 4, 16.0
9
.2005
Base station settings
The base settings are carried out using a reg-
istered Gigaset handset.
Changing ringtones
u
Volume:
You can choose between five volumes
and the "crescendo" ring (
Select "0" to deactivate the base ringer.
u
Ringtones:
You can set a ringer melody for external
calls (
u
Time control:
You can specify when the base should
not ring (e.g., during the night).
§Menu§
¤
Settings
¤
Audio Settings
¤
Ringtones (Base)
¤
Ringer Volume
/
Ringer Melody
/
Time Control
For more information on adjusting the set-
tings, see page 43.
Activating/deactivating
music on hold
§Menu§
¤
Settings
¤
Telephony
¤
Music on hold
Press
§OK§
to activate or deactivate music on
hold (
³
= on).
Activating repeater support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite:
A repeater is registered.
§Menu§
¤
Settings
¤
System
¤
Repeater Mode
Press
§OK§
to activate/deactivate repeater
mode (
³
= activated).
After activating or deactivating the
repeater, switch your handset off and
on again (
Protecting against
unauthorised access
Protect the system settings of the base
station with a PIN known only to yourself.
The system PIN must be entered when,
for example, registering/de-registering a
handset to/from the base or when restoring
the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting:
0000
) to a 4-digit
PIN known only by you.
§Menu§
¤
Settings
¤
System
¤
System PIN
~
Enter the current system PIN
and press
§OK§
.
~
Enter your new system PIN and
press
§OK§
.
Please note
u
Eco Mode
/ Eco Mode+
and repeater support cancel each
other out, i.e., you cannot use Eco
Mode and
Eco Mode+
when using a
repeater.
u
The default encrypted transmission
setting is deactivated when a
repeater is activated.
