67
Connecting the base to a PABX
Gigaset C100 / englisch / A31008-C100-J101-1-7619 / pabx.fm / 24.06.2003
Connecting the base to a PABX
The following settings are only needed when your PABX requires them,
please refer to
the operating instructions for your PABX
.
Dialling modes and recall
The current setting is indicated by
‰
.
Step 1: Changing the dialling mode
The following dialling modes can be set:
◆
Tone dialling (DTMF),
◆
Dial pulsing (DP),
◆
DTMF earth (country-specific).
Step 2: Setting the recall
i
You cannot send or receive text messages on PABX's that do not support
Calling Line Identification.
[_______________]
MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________]
Base Settings
[_________]
OK
Select the menu item and confirm.
[__________] [_____________________________________________________________]
Additional Features
[_________]
OK
Select the menu item and confirm.
[_____________________________________________________________] [__________]
Dialling Mode
OK
Confirm.
[__________] [_________]
OK
Select the dialling mode and confirm.
Long
press (back to idle status).
[_______________]
MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________]
Base Settings
[_________]
OK
Select the menu item and confirm.
[__________] [_____________________________________________________________]
Additional Features
[_________]
OK
Select the menu item and confirm.
[__________] [_____________________________________________________________]
Recall
[_________]
OK
Select the menu item and confirm.
[__________] [_________]
OK
Select recall and confirm.
Long
press (back to idle status).