Siemens Gigaset C1 User Manual Download Page 87

Page: 87 / 300

Setting the answering machine

S1_SL1 / englisch / A31008-M373-B103-1-7619 / answeringm_config.fm / 08.06.2004

Example:

The answering machine of your office should be deactivated during normal office hours

(8:00 to 5:00 p.m.). Only during the lunch hour (12:00 to 3:00 p.m.) should the answer-

ing machine be activated using announcement 1. After office hours (5:00 to 8:00 p.m.)

the answering machine should use announcement only. The following time sections

must be defined:
1. Start time 08:00, AM off
2. Start time 12:00, announcement 1
3. Start time 13:00, AM off
4. Start time 5:00 p.m., announce only

Defining start times and announcements for Monday to Friday

Precondition:

You have selected an answering machine (page 138).

Settings

Select the menu item and confirm.

Time control

Select the menu item and confirm.

Mon - Fri

Select the menu item and confirm.

‰

= at least one

start time is entered.

Select entry for the time section,

e.g.,

**:** Announcement 1

, and confirm.

Select ann.

Select the menu item and confirm.

Announcement 1

Select

Announcement 1, Announcement 2,

Announcem. only

AM off

and confirm.

Press the display key.

Start time

Select the menu item and confirm.

Enter the start time (4-digit). The start time specifies

the end of the previous time section.

Press the display key to open the submenu.

Save entry

Confirm.

Long

press (back to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands