Siemens Gigaset C1 User Manual Download Page 86

Page: 86 / 300

Setting the answering machine

S1_SL1 / englisch / A31008-M373-B103-1-7619 / answeringm_config.fm / 08.06.2004

Locking the answering machine, defining AM PIN

You can protect your answering machine against unauthorised access. To do this, define

an AM PIN (Personal Identification Number) and activate the AM lock. The settings may

then only be changed and the messages played back after the PIN has been entered.

Entering, changing the AM PIN

When supplied, the AM PIN is preconfigured to 0000.

Precondition:

You have selected an answering machine (page 138).

If you made a typing error when entering the AM PIN, you can delete your entry using

the

key and enter it again.

Activating/deactivating the AM lock

When the phone is supplied the answering machine lock is deactivated.

Precondition:

You have selected an answering machine (page 138).

Setting the time control

You can set the answering machine so that it is activated or deactivated depending on

the time of day, as well as using different announcements depending on the time of

day.
You can define (for the 24-hour day) up to four time sections with different settings for

the answering machine. You must specify a start time for each time section. The start

time of the 2nd time section is the end time of the 1st time section, etc.. The start time

of the 1st time section is the end time of the last defined time section. For each section,

you can set if the answering machine should be activated/deactivated and which

announcement or announcement only should be used.
You specify the time control for work days (Monday to Friday). On the weekend (Satur-

day and/or Sunday), either the time control of the work days can be used, or one of the

announcements is activated for the entire day, or the answering machine is deactivated

for the entire day.

The answering machine can only be controlled remotely if you have

defined an AM PIN.

Settings

Select the menu item and confirm.

Change AM-PIN

Select the menu item and confirm.

Enter new AM PIN (up to 8 digits) and confirm.

Repeat the new AM PIN and confirm.

Settings

Select the menu item and confirm.

AM lock

Select the menu item and confirm (

‰

= lock set).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands