Siemens Gigaset C1 User Manual Download Page 46

Page: 46 / 300

Using the directory and other lists

S1_SL1 / englisch / A31008-M373-B103-1-7619 / directories.fm / 08.06.2004

Deleting the voice pattern

You can delete a particular user's voice pattern for an entry. This does not affect the

voice patterns of the other users.
Open the directory for voice-activated dialling (see

Step 1

, page 43).

Now:

Changing a user name

You can change the user names (

User 1

User 4

s v

Select an entry (marked with

) and open the

menu.

Delete Name

Select the menu item and confirm. The entry is dis-

played without

Long

press (back to idle status).

Deleting a voice pattern for an entry does not affect its number or name –

they are retained. The voice patterns of other users for the same entry are

also unaffected.

Open the directory.

R[RRRRRRRRRRRRRRRRRRRR]

Voice

Select an entry and press the display key.

User 2

Select the user and confirm,
e.g.

User 2

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Edit

Press the display key to initiate changes.

R[RRRRRRRRRRRRRRRRRRRR]

Save

Enter the new name and save.

Long

press (back to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands