Siemens Gigaset C1 User Manual Download Page 33

Page: 33 / 300

Functions during a call

S1_SL1 / englisch / A31008-M373-B103-1-7619 / during.fm / 08.06.2004

Conference call

Precondition:

You have established an enquiry call (page 29 an d page 30).

There is both an active call (the one established with an enquiry call) and a held call (the

first). In a conference call you can speak to both other callers at the same time.

It is possible to conduct two conference calls at the same time on one base.

Establishing a conference

You are making an enquiry call. The first caller is put on hold.
Press the display key

CONF.

to establish conference switching.

Ending a conference

You have several options for ending a conference call:

Forwarding an incoming call – CD (Call Deflection)

CD enables an incoming call to be forwarded to any phone number while it is ringing,

without having to answer the call.
You can pre-set a forwarding destination (page 121), dial a phone number from the

directory or enter a new number.

You can make a conference call with

◆

two external users or

◆

with one internal user and one external user.

either ...

You end the conference:

Hold down (return to idle status).

or ...

You change the conference to an enquiry call:

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

INDIV.

Press the display key to change the conference

switching to an enquiry call (page 29 or page 30).

The connection that was active immediately before

the conference was established becomes the active

call again.

Open the menu.

Forward

Select the menu item and confirm.

The pre-set forwarding destination is dialled.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands