Siemens Gigaset C1 User Manual Download Page 278

Page: 278 / 300

Making calls with the door subscriber station

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / door_intercom.fm / 08.06.2004

Call waiting at the door subscriber station

The door subscriber station calls internal users for 20 seconds. If call forwarding from

the subscriber station is directed externally, the ringing time is extended to 60 seconds.

Accept call waiting

Press the display key

ACCEPT

. You accept the waiting call.

If the interrupted call is an internal call, it is disconnected when the waiting call is picked

up.
If the interrupted call is an external call, it is placed on hold when the waiting call is

picked up. Both parties are shown on the display, the current one is marked.

Changing parties

If the interrupted call is an internal call, you can change conversation partners.

Internal call with door subscriber station

You can call the door subscriber station internally (page 16).

MENU

Open the menu.

Accept

Select and confirm to store the door opener. The

door opener is opened. The following confirmation

is displayed on the screen

Door is opening

. The con-

nection with the door subscriber station is ended

automatically when the door is opened.

End your current call. The waiting call becomes a

normal call.

Press the talk key to answer the call.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands