Siemens Gigaset C1 User Manual Download Page 265

Page: 265 / 300

System settings

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Editing an entry

Deleting external call forwarding

Activate?

Select the menu item and confirm.

or ...

Deactivate:

Deactivate?

Select the menu item and confirm.
You will be notified if you have selected call forward-

ing that another internal user has already set up.

You can either return to the selection of other set-

tings with a

short

press on the end call key, or con-

tinue with

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Ext. call forw.

Select the menu item and confirm.

Enter system PIN if required (page 78).

Select call forwarding, e. g.

MSN1 to 33333

MENU

Open the submenu.

Edit entry

Select the menu item and confirm.
You will be notified if you have selected call forward-

ing that another internal user has already set up.

You can either return to the selection of other set-

tings with a

short

press on the end call key, or con-

tinue with

MENU

Enter the new number and open the menu.

Save entry

Confirm.

Yes

Confirm to set up call forwarding.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Ext. call forw.

Select the menu item and confirm.

Enter system PIN if required (page 78).

Select call forwarding, e. g.

MSN1 to 22222

MENU

Open the submenu.

Delete entry

Select the menu item and confirm.
You will be notified if you have selected call forward-

ing that another internal user has already set up.

You can either return to the selection of other set-

tings with a

short

press on the end call key, or con-

tinue with

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands