Siemens Gigaset C1 User Manual Download Page 262

Page: 262 / 300

System settings

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Assigning a phone number (MSN)

You can assign certain individual phone numbers (MSN's) to registered terminals. When

doing this determine

◆

which phone number makes a registered terminal ring (receive MSN)

◆

under which number an internal user dials (send MSN).

Assigning a receive MSN

As supplied, a newly registered handset will ring whenever a phone number you have

set up is dialled.
If you want to assign the handset certain specific receive MSN's:

Assigning a send MSN

When the phone is supplied no send MSN has been entered. The exchange provides the

send MSN.
You can determine a send MSN for each internal user. This MSN is shown to the person

you call and the call is also charged to this MSN.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 78).

Setup user

Select the menu item and confirm.

Setup device

Select the menu item and confirm.

Int.11

Select internal number for the handset, e. g.

Int.11

MENU

Open the submenu.

Receive MSN

Select the menu item and confirm.

Select MSN and confirm, e. g.

MSN1: Anna

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 78).

Setup user

Select the menu item and confirm.

Setup device

Select the menu item and confirm.

Int.11

Select internal number, e. g.

Int.11

MENU

Open the submenu.

Send MSN

Select the menu item and confirm.

Select MSN and confirm, e. g.

MSN1: Anna

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands