Siemens Gigaset C1 User Manual Download Page 259

Page: 259 / 300

System settings

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

System settings

The abbreviations in brackets after the titles indicate the ISDN service concerned. Some

services may only be used if they have been authorised by the network provider (there

may be an extra charge).

Changing the name for an internal party

When the phone is supplied, all internal numbers are allocated the names

Int.11

Int.12

etc., according to their numbering. You can change these entries individually to suit

your requirements.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 78).

Setup user

Select the menu item and confirm.

Setup device

Select the menu item and confirm.

Int.11

Select internal number, e. g.

Int.11

MENU

Open the submenu.

Name

Select the menu item and confirm.

MENU

Change the name and open the menu.

Save entry

Confirm. The name is now shown in the internal list,

including when an internal call is made from this

internal number.

Since names are saved in the base station, another name can be allocated

to a handset when registering to a different base. This makes it possible

to recognise which base the handset is currently connected to.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands