Siemens Gigaset C1 User Manual Download Page 256

Page: 256 / 300

Date and Time

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / time_calendar.fm / 08.06.2004

Deactivating an appointment call

An appointment is signalled with the selected ringer melody (page 90).

Cancelling an appointment

Viewing an appointment you have not kept

If the handset reminds you of an appointment but you do not keep it, a message

appears in the display together with the name of the appointment. If you did not name

the appointment, its date and time are displayed. Press

any key

to cancel the message.

Press the display key. The alarm clock icon

disap-

pears when the alarm clock is not activated.

MENU

Open the menu.

Calender/Clock OK

Select the menu item and confirm.

Set Appointment

Confirm (

‰

disappears).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands