Siemens Gigaset C1 User Manual Download Page 234

Page: 234 / 300

Operating the answering machine directly

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / answeringm_use.fm / 08.06.2004

Recording is automatically terminated if:

◆

you pause for more than 8 seconds when recording your announcement

◆

the memory is full. Delete old messages or announcements you no longer require.

The announcement will not be stored if you press the end call key during the recording

or repeat playback.

Playing back/deleting announcements

Only announcements that have been recorded can be deleted. The standard message

cannot be deleted.

Precondition:

You have selected an answering machine (page 53).

Recording memos

Memos are "spoken notes" recorded, for example, for members of your family. A memo

is played back, saved and deleted in the same way as a message. If a new memo arrives

the

icon is displayed on all the handsets assigned to the answering machine.

You can also record memos when the answering machine is deactivated.
When the memory is full, and when there are pauses in the recording longer than

8 seconds, the recording of the memo is cancelled automatically.

Precondition:

You have selected an answering machine (page 53).

To stop recording, press the end call key

Announcements

Select the menu item and confirm.

Announcement 2

Select announcement, e. g.

Announcement 2

(

‰

= activated).

MENU

Press the display key to open the submenu.

either ...

Play back the announcement:

Play back

Select the menu item and confirm.

or ...

Delete the announcement:

Delete

Select the menu item and confirm.

Press the display key to confirm the prompt.

Memos

Select the menu item and confirm.

Record memo

Select the menu item and confirm.

Press the display key to start recording.
Say the memo message.

Press the display key to end the recording.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands