Siemens Gigaset C1 User Manual Download Page 225

Page: 225 / 300

SMS (text messages)

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Sending a text message as an e-mail

You must send the text messages to the

number for the e-mail service of your send

centre

. The number for the "Anny Way" SMS centre is 6245, and for Deutsche Telekom

it is 8000.

Receiving text messages, incoming message list

Notes on receiving a text message

New SMS are signalled to all handsets with the same receive MSN (depending on the

features offered by the individual handset) by a message in the display, by flashing of

the message key

and by an advisory tone. The date and time (transferred from the

SMS centre) are indicated for each SMS received.
The incoming message list contains only those text messages sent to a receive MSN to

which your handset is assigned. If no MSN's have been set up, then all text messages

received are shown on all handsets.
In the incoming message list new (unread) messages come before the old messages.

New and old messages are sorted according to their time of arrival: oldest new

message, ... , newest message, oldest old message, ..., newest old message.

Gigaset C1:

New text messages are indicated by the icon

and by an advisory tone.

Gigaset C2:

New text messages are indicated by the message

New messages

, by the

key flash-

ing and by an advisory tone.
Linked text messages are displayed as

one

SMS. If an incoming linked message is too

long or has not transferred completely, it will be split into individual messages and

stored in the incoming message list.

Opening the incoming message list

The

incoming message list

shows you:

◆

all received messages,

◆

messages that could not be sent despite several attempts. These messages are all

stored with an error status (page 50).

Enter the number of the e-mail service.

MENU

Press display key to open menu.

Send Text

Confirm.

6245

u v

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands