Siemens Gigaset C1 User Manual Download Page 21

Page: 21 / 300

Registering/de-registering handsets

S1_SL1 / englisch / A31008-M373-B103-1-7619 / registering_hs.fm / 08.06.2004

Registering/de-registering handsets

On a few bases, the registration of your Gigaset S1 handset is done automatically. You

can also register your Gigaset S1 handset manually. You must register your Gigaset SL1

handset

manually

Your handset can be registered on up to four bases.

Automatic registration:

Gigaset S1 handset

To register for the first time, place the

deactivated

handset in the base with the

display

facing upwards

. Registration takes around 1 minute. The handset

automatically

receives the lowest free internal number from the range

Int.11

Int.16

. This will

appear in the display after registration is complete.
If all internal numbers on your phone have already been assigned for wireless terminals,

please de-register another handset you no longer require before registering a new one

(page 21).

Manual registration: Gigaset S1 and SL1

If all internal numbers on your phone have already been assigned for wireless terminals,

please de-register another handset you no longer require before registering a new one

(page 21).
You must initiate handset registration on the handset and on the base.

1. Prepare the base for registration (see operating instructions for the base).

2. On the handset (within 60 sec.)

After registration the handset reverts to idle status. The handset's internal number is

shown in the display.

On the base:

CX100isdn

CX150isdn

SX100isdn

SX150isdn

Open the menu.

s ì

Select the menu item and confirm.

Register H/Set

Select the menu item and confirm.

Base 1

Select base (1–4) and confirm, e.g.

Base 1

Enter the system PIN of the base (the default is 0000)

and confirm.

Regstr.Procedure

appears in the dis-

play along with the name of the base e.g.

Base 1

Once the handset has located the base, the list of

free internal numbers is shown in the display.

Int.11

Select internal number and confirm, e.g.

Int.11

The handset interrupts the base search after 60 seconds. If registration

has not been completed within this time, repeat the procedure.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands