Siemens Gigaset C1 User Manual Download Page 203

Page: 203 / 300

Functions during a call

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / during.fm / 08.06.2004

Ending a conference

You have several options for ending a conference call:

Transferring calls

Transferring a call to an external number – ECT (Explicit Call Transfer)

Precondition:

It is only possible to transfer a call if the network provider or the exchange

also supports ECT. If this is not the case, then the external call is disconnected. The

number cannot be called back.
You are making an external call and would like to transfer it to another external user.

Establish an external enquiry call (page 21), and then press the end call key

(even

before the other party has answered) to transfer the call.

Transferring a call to another handset

You are making an

external

call and would like to transfer it to another handset.

Establish an internal enquiry call (page 22), and then press the end call key

to trans-

fer the call. You can press the end call key before the second user has responded.

either ...

You end the conference:

Press the

end call

key

The conference call is ended; the two other users

will hear the busy tone.

or ...

You change the conference to an enquiry call:

MENU

Open the menu.

INDIV.

Confirm to change the conference to an enquiry call

(page 21 and page 22).The connection that was

active immediately before the conference was estab-

lished becomes the active call again.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands