Siemens Gigaset C1 User Manual Download Page 191

Page: 191 / 300

Preparing to use the handset

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / starting.fm / 08.06.2004

Correcting wrong inputs

After a correct input you will hear a confirmation tone (rising tone sequence). An incor-

rect input is indicated by an error tone (descending tone sequence). You can repeat the

input.
If you have entered the wrong characters when entering figures or text you can correct

this as follows:

Deleting characters to the left of the cursor with

To correct a telephone number or text, use the display keys

to move the cursor

to the right of the incorrect character. Now press the display key

. The character is

deleted. Now enter the correct character.

Inserting characters to the right of the cursor

If you have omitted a character, use the display keys

to go to the place where

you want to insert the character, and key it in.

Overwriting characters

The number of digits for entering the date or time is predetermined and the field is pre-

configured. Using the display keys

, position the cursor

the digit that is to be

changed and overwrite it.

Idle status

Display in idle status (example)
Gigaset C1:

Gigaset C2:

Reverting to idle status from anywhere in the menu:

◆

Press the end call key

and hold or

◆

Press no key: The display

automatically

reverts to the idle status after 1or 2 min-

utes.

Changes which you have not confirmed/stored by pressing

will be rejected.

Only available with Gigaset with

answering machine: answering

machine activated

12:50

12.04.03

INT

12:50

12.04.03

INT

Þ ¼

Only available with Gigaset with

answering machine: answering

machine activated

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands