Siemens Gigaset C 450 User Manual Download

Page: 51 / 68

Setting the base station

Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / registr_sett.fm / 6.8.07

ion 4,

.09.

2005

Repeater support

With a repeater you can increase the range

and reception strength of your base sta-

tion. You will need to activate repeater

mode. This will terminate any calls that

are in progress at the time.

Precondition:

A repeater is registered.

Eco mode is disabled.

Base

Add. Features

Repeater Mode

§Yes§

Press the display key.

When repeater mode is active, the menu

item is marked with .

Restoring the base station to the
factory settings

When the settings are restored

eco mode is disabled,

handsets are still registered,

the system PIN is not reset.

Base

Base Reset

Enter the system PIN and press

§OK§

§Yes§

Press the display key.

Cancel the restoring process by pressing

or the display key

§No§

Press

and

hold

(idle status)

Please note:

Repeater support and eco mode (see page 13)

cancel each other out, i.e. both functions can-

not be used at the same time.

‰

Summary of Contents for Gigaset C 450





































































Search results

Summary of Contents for Gigaset C 450

Reviews:

Related manuals for Gigaset C 450

Brands by name

Popular brands

Siemens Gigaset C 450, User Manual

Search results

Summary of Contents for Gigaset C 450

Reviews:

Related manuals for Gigaset C 450

Brands by name

Popular brands