Siemens Gigaset C 450, User Manual

Page: 45 / 68

44
Setting the handset
Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / registr_sett.fm / 6.8.07
Ve
rs
ion 4,
16
.09.
2005
Level:
Set noise level sensitivity ( Low or High ).
¤
Save the changes.
Changing a set external destination
number
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 43).
¤
Save changes (page 58).
Changing a set internal destination
number
v
¢
í
¢
Room Monitor
s
Scroll to the Call to: line.
§Delete§
Press the display key.
§Edit§
Press the display key.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 43).
¤
Save the changes.
Deactivating the room monitor
remotely
Preconditions : The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys
9 ;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key
§OFF§
on the handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
§Save§
(page 43).
Setting the handset
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Quick access to functions
The display keys have a function preset by
default. You can change the function
assigned.
To start the function, you then simply
need to press the button.
Changing display key assignments
¤
Press and hold the left or right display
key.
The list of possible key assignments is
opened. The following can be selected:
INT
Internal calls (see page 41).
SMS
Assign the menu for SMS functions to a
key (see page 26).
SMS Notific.
Assign key with the menu for activating
SMS notification (page 29).
Withhold No.
Suppress Calling Line Identification for
the next call (page 18).
If a function or number has already been
assigned to the left display key, the
selected function (or its abbreviation) will
be displayed in the lowest display line
above the display key.
Starting a function
With the handset in idle status, press the
display key briefly .
The function menu is opened.