Siemens Gigaset C 450 User Manual Download

Page: 32 / 68

SMS (text messages)

Gigaset C470/C475 / Grossbritannien / A31008-M1902-L101-1-7619 / sms_BRD_neutral.fm / 6.8.07

ion 4,

.09.

2005

Sending an SMS through another SMS

centre

Activate the SMS centre (2 to 4) as the

active send service centre.

Send the SMS.

SMS on a PABX

You can only receive an SMS when the

Calling Line Identification

for-

warded

to the extension of the PABX

(CLIP)

. The CLIP evaluation of the

phone number for the SMS centre takes

place in your

Gigaset

If required, you must prefix the number

for the SMS centre with the access code

(depending on your PABX).
If in doubt, test your PABX, e.g. by

sending an SMS to your own number:

once with and once without the access

code.

When you send SMS messages, your

sender number may be sent without

your extension number. In this case the

recipient cannot reply to you directly.

Sending and receiving SMS messages

ISDN PABXs

is only possible via the MSN

number assigned to your base station.

Activating/deactivating SMS
function

If you deactivate the SMS function, you

cannot send or receive any SMS messages

with your phone.
The settings which you have made for

sending and receiving SMS messages (e.g.

the call numbers of the SMS centres) and

the entries in the incoming and draft mes-

sage lists are saved even after you turn off

your phone.

Open

menu.

5 5 O 2 L

Enter the digits.

§OK§

Deactivate SMS function.

Or:

§OK§

Activate SMS function (default

setting).

SMS troubleshooting

Error codes when sending

Self-help with errors

The following table lists error situations

and possible causes and provides notes on

troubleshooting.

E0 Calling Line Identification permanently

withheld (CLIR) or Calling Line

Identification not activated.

FE Error occurred during SMS transfer.
FD Connection to SMS centre failed, see self-

help.

You cannot send messages.
1. You have not requested the CLIP service

(Calling Line Identification Presentation).

Ask your service provider to enable this

service.

2. SMS transmission has been interrupted

(e.g. by a call).

Re-send the SMS.

3. Network provider does not support this fea-

ture.

4. No number or an invalid number is entered

for the SMS centre set as the active send

service centre.

Enter the number (page 30).

You receive an incomplete SMS.
1. Your phone's memory is full.

Delete old SMS messages (page 28).

2. The service provider has not yet sent the

rest of the SMS.

Summary of Contents for Gigaset C 450





































































Search results

Summary of Contents for Gigaset C 450

Reviews:

Related manuals for Gigaset C 450

Brands by name

Popular brands

Siemens Gigaset C 450, User Manual

Search results

Summary of Contents for Gigaset C 450

Reviews:

Related manuals for Gigaset C 450

Brands by name

Popular brands