11
AL180-AL185_AL280-AL285 / IM en / A31008-M2003-R101-2-UZ19 / main.fm / 12.11.2010
Assigning key 1 for fast access to the
answer machine (network mailbox)
Simply press and
hold
key
1
on the handset and you
will be connected directly to the answer machine
(network mailbox).
See Menu tree
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Preconditions:
u
You have set a system PIN other than 0000
u
The phone you are using for remote operation has
touch tone dialling (DTMF), i.e. you hear different
tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number)
¤
while listening to your
announcement: press the
9
key and enter the system
PIN
The following keys are used for operation:
Activating the answer machine
~
(Enter your own number and allow the phone to ring
until you hear the message: "Please enter PIN")
¤
~
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deacti-
vated remotely.
Locating a handset
("paging")
You can locate your handset using the base station.
u
Briefly
press the registration/paging key on the
base station (
u
All handsets will ring simultaneously ("paging"),
even if the ringer tones are deactivated.
End paging:
briefly
press the register/paging key on
the base station (
page 1) or the talk key
c
on a
handset.
Registering handsets
You can register up to four handsets on your base sta-
tion (Gigaset AL18H/AL28H) recommended).
For automatic registration of handsets to
Gigaset AL180/AL185/AL280/AL285, see
Manual registration of handsets to
Gigaset AL180/AL185/AL280/AL285
1. On the handset: MENU
¤
Settings
¤
OK
¤
Handset
¤
OK
¤
Register HS
¤
Enter the system PIN of the base
station (default is 0000)
¤
OK
.
Registering flashes in the display
.
2. On the base station:
within
60 sec.
of entering the
system PIN, press and hold the registration/paging
key (
page 1) (min. 3 sec.).
Registration takes approx. 1 minute.
De-registering handsets
Handsets can only be de-registered by resetting the
base station to its default settings.
This will also reset
every other setting
If you have
only
registered handsets for other GAP-
compatible devices, these can only be de-registered
with a
hardware reset
Using several handsets
Making internal calls
Internal calls are free calls to other handsets that are
registered to the same base station.
To make a call to other handsets, press
u
INT
¤
~
(1...4, enter internal number of the hand-
set)
¤
OK
, the handset is called
or
u
INT
¤
star key
P
¤
OK
, all handsets are called.
When a participant answers you can speak to them.
To end the call, press
a
.
A
Go to the start of the current message.
Press twice to go back to the previous mes-
sage.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
Delete current message.
Please note:
Each
additional handset must be registered on the
base station in order for it to work properly!