87
Setting the base station via the handset
Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 28.04.2009
Ve
rs
ion 8,
03
.09
.200
8
Entering local and extra area codes
Use the following guidelines to make local calls (calls to the local fixed line net-
work):
u
Depending on the exchange, area codes are not dialed for local calls via your
fixed line network. However, all calls are stored in the Calls list with access
codes. To call back a caller using the Calls list, you must store the local area
code in the phone in whose area your phone is being used. If your phone is
in a "multiple area code" area, you must also enter the other area codes that
belong to this
area as
extra codes
.
u
With local calls via your VoIP connection the area code must also be dialed.
If you have stored your area code in the phone and activated the
Predial area
code for local calls through VoIP
option
), the area code entered
is dialed automatically when dialing numbers without an area code
(e.g. when dialing from the directory).
ú
For entering the area code with the Web configurator,
Entering a local area code
§Menu§
¢
Settings
¢
Base
¢
Telephony
Area Code
Select and press
§OK§
.
~
Enter a local area code (permitted characters (maximum 3) are "*",
"#") and press
§OK§
.
a
Press and
hold
(idle status).
Entering extra codes
§Menu§
¢
Settings
¢
Base
¢
Telephony
Extra Codes
Select and press
§OK§
.
q
Select entry ("–––" = blank entry).
X
If necessary, delete an existing extra code.
~
Enter an extra code (permitted characters (maximum 3) are "*", "#")
and press
§OK§
.
Repeat the above steps until you have entered all the extra codes for your area.
A maximum of 5 extra codes can be stored.
a
Press and
hold
(idle status).
Updating the base station firmware
If necessary, you can update your base station firmware.
The firmware update is downloaded directly from the Internet by default.
The relevant Web page is preconfigured in your phone.
