Siemens Gigaset A580 User Manual Download Page 76

Page: 76 / 197

Using multiples handsets

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 28.04.2009

ion 8,

.09

.200

Ending a call

Press the End Call key.

Transferring a call to another handset

You can forward (connect) an external call, made via the fixed line network or

VoIP, to another handset.

Prerequisite:

You are conducting an external call.

Open the list of registered handsets.

Select handset or

Call all

§OK§

Press the Display key or the Talk key.

Or:

Open the list of registered handsets.

Enter the internal number of the handset.

The external participant hears music on hold if activated (

Page 86

When the internal participant answers:

If necessary announce the external call.

Press the End Call key.

The external call is transferred to the other handset.
If the internal participant does

not

respond or is busy:

§Menu§

Back

Select and press

§OK§

You are reconnected with the external participant.

You can also press the End Call key

when forwarding a call before the inter-

nal participant picks up the call.
Then, if the internal participant does not answer or the line is busy, the call will

automatically return to you (the display will show

Recall

Initiating internal consultation call, conference call

You are talking to an

external

participant (via fixed line network or VoIP) and

can call an

internal

participant at the same time to hold a consultation call.

Prerequisite:

You are conducting an external call.

Open the list of registered handsets.

Select handset or

Call all

§OK§

Press the Display key or the Talk key.

Or:

Open the list of registered handsets.

Please note

You can reject an internal call by pressing the End Call key

. Other hand-

sets will continue to signal an internal "group call".

If the called handset is not answered, the busy tone sounds after approx.

3 minutes.

Summary of Contents for Gigaset A580






































































































































































































Search results

Summary of Contents for Gigaset A580

Reviews:

Brands by name

Popular brands

Siemens Gigaset A580, User Manual

Search results

Summary of Contents for Gigaset A580

Reviews:

Brands by name

Popular brands