Siemens Gigaset A580 User Manual Download Page 33

Page: 33 / 197

Operating the handset

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / starting.fm / 28.04.2009

ion 8,

.09

.200

Reverting to idle status

You can revert to idle status from anywhere in the menu as follows:

Press and

hold

the End Call key

Or:

Do not press any key: after 2 minutes the display will

automatically

revert

to idle status.

Any settings you have not confirmed by pressing

§OK§

will be discarded.

An example of the display in idle status is shown on

Page 26

Activating/deactivating the handset

With the phone in idle status, press and

hold

the End Call key (con-

firmation tone) to switch off the handset.

Press and

hold

the End Call key again to switch the handset on.

Activating/deactivating the keypad lock

The keypad lock prevents any inadvertent use of the phone.

Press and

hold

the Pound key (#) to activate or deactivate the key-

pad lock. You will hear the confirmation tone.

When the keypad lock is activated you will see the

icon on the display and

a message when you press a key.
The keypad lock is deactivated automatically if someone calls you. It is reacti-

vated when the call is finished.

Summary of Contents for Gigaset A580






































































































































































































Search results

Summary of Contents for Gigaset A580

Reviews:

Brands by name

Popular brands

Siemens Gigaset A580, User Manual

Search results

Summary of Contents for Gigaset A580

Reviews:

Brands by name

Popular brands